- Function
- Parameters
? Built-in high pass filter ,can effectively attenuate the low-frequency noise without damaging the radio quality of voice
? Built in microphone preamplifier power supply module, no need to use external power supply module
? The double hose design of the microphone can meet the needs of different scenarios
? The microphone wiring port adopts standard 3-pin XLRM, which can be connected to any conference microphone base designed by 3-pin XLRM or directly connected to the mixer
|
Mode |
RX-J80 |
|
Pickup |
electrostatic capacitive |
|
Pointing properties |
cardioid single pointing |
|
frequency response |
80-16，000Hz |
|
High pass filtering |
＞80Hz,18dB/octave |
|
sensitivity |
＞-45dB(7.0mv)1V/1Pa |
|
Output impedance |
200 |
|
Maximum withstand sound pressure |
140dB sound pressure，1KHz/1% T,H,D |
|
Dynamic range (typical) |
111dB,1KHz Max sound pressure |
|
SNR |
665dB,1KHz于1Pa |
|
Phantom power supply |
长DC 9-52V consume power 2mA |
|
Switch |
AC/DC, high pass filtering |
|
Overall dimension |
length: 495mm，Pickup diameter：12.3mm, Bottom plug diameter：18.9mm |
|
Output connector |
Built in 3-pin XLR male |